YetAnotherConfigLib

YACL for Fabric, Forge, NeoForge and Quilt: What Actually Differs

One YACL version is several files. The library code that draws the settings screens is shared, but each loader needs its own build, its own filename suffix and, on Fabric, one extra required mod. Pick the build that matches the loader in your profile; the version number alone does not make a file compatible.

Four coloured voxel blocks for Fabric, Forge, NeoForge and Quilt, each with its own JAR

Why one version has several files

Mod loaders load mods in different ways. Each loader expects its own metadata inside the JAR and calls the mod through its own entry points. A library like YACL, which hooks into menus and rendering, has to be compiled against the loader it will run under. The publisher therefore releases the same library version as parallel builds, one per loader, and records the loader in the release metadata and the filename suffix.

For you, the practical effect is simple: the release list for a game version splits by loader. YACL 3.8.2, for example, exists for Minecraft 1.21.1 as a Fabric file and as a NeoForge file with different filenames and different contents. The finder shows you only the branch you select, which removes the most common way players grab the wrong one.

Fabric builds and the Fabric API requirement

Fabric builds of YACL list Fabric API as required content in their release metadata. The 3.8.2 Fabric build for 1.21.1 names it as a required dependency, so a complete Fabric install has at least three parts: Fabric Loader in the profile, Fabric API in the mods folder and the YACL file itself. Leave out Fabric API and the loader stops with a missing dependency that names Fabric API rather than YACL, which sends many players back to the YACL download when the missing file is a different one.

Fabric players also meet YACL most often through Mod Menu, which gives mods a list and, for many mods, a config button. Mod Menu is a separate mod. YACL does not include it, and a mod's settings can exist without it, but the pair travel together in most Fabric setups.

Forge and NeoForge builds

Forge support in the YACL release history centres on older game versions, with Minecraft 1.20.1 the best covered branch: builds such as 3.6.6 for Forge 1.20.1 sit alongside the Fabric builds of the same version. NeoForge builds cover the 1.20.2 and later lines, where the NeoForge loader took over that side of the ecosystem. The NeoForge build of 3.8.2 for 1.21.1 lists no required extra content in its Modrinth metadata, a real difference from the Fabric branch of the same release.

Forge and NeoForge are not interchangeable, despite the family resemblance. A profile that starts with NeoForge needs the neoforge suffix. If your pack moved from Forge to NeoForge during a game update, every library in the folder needs the same move, including YACL.

Quilt builds and shared files

Quilt appears in the early release history. The first YACL release, 1.0.0 for Minecraft 1.19, is recorded for Fabric and Quilt together, because Quilt was designed to load Fabric mods. Later releases focus on Fabric, Forge and NeoForge. If you run a Quilt profile, the finder shows you the builds the publisher recorded for Quilt, and an empty result means the publisher recorded none for that game version.

Do not assume a Fabric file will behave in a Quilt profile just because the earliest builds were shared. Use the recorded loader list for the specific release you want. That list is what the finder filters on, and it is the same list the publisher maintains.

How to confirm your loader before downloading

  1. Open the profile or instance you will play and find its version details.
  2. Read the loader name as written there: Fabric, Forge, NeoForge or Quilt. Note its version too, since very old loader builds can reject new mods.
  3. Select that loader in the finder and let the release list rebuild.
  4. Compare the suffix of the offered filename with the name you read. They should match word for word.

If two profiles share a name and differ only in loader, rename one now. A name like Riversong Pack Fabric saves a wrong-folder install later, and the profile guide in the installation category shows how to check which instance a folder belongs to.

Loader versions matter too

Each loader has its own version line, separate from the game and the library. A very old loader build can refuse a current mod even when every other fact matches, because the mod uses loader features added later. When a loader message complains about the loader itself, or a mod lists a minimum loader version on its page, update the loader inside the profile before replacing library files. Loader updates happen through the launcher's instance settings or the loader's own installer, and they keep your mods folder untouched.

The practical order for a fresh profile is loader first, game second, mods third. Build the profile on the loader version your pack or mod set expects, then let the finder and the catalogue work within it. Players who install mods first and fix the loader afterwards end up reading errors that blame the mods for a foundation problem.

Reading a mixed folder

Open a long-lived mods folder and you may find library files for more than one loader, left over from a pack migration. The game ignores the files its loader cannot read in some setups and complains in others, but either way the strays are noise that will mislead your next diagnosis. When you settle on a loader for a profile, remove the other loaders' library builds from that profile and keep them, if you must, in the backup folder outside the instance, labelled with the loader they belong to.

A short history visible in the releases

The release list tells the ecosystem's recent story without any commentary. Early builds speak Fabric and Quilt. The 1.20.1 era adds a strong Forge bench beside Fabric. From 1.20.2 onward, NeoForge takes the second seat, and the newest branches run Fabric and NeoForge in parallel. A player choosing a loader for a new profile can read that bench strength as a hint: loaders with deep library benches make every later dependency problem easier, because the file you need probably exists.

None of that makes one loader better in the abstract. Packs, mods and friends decide loaders in practice. The library's job is to be present on the loader you chose, in the version your mods require, and its release history shows it doing that job across the ecosystem's shifts.

Server-side notes per loader

On the server side, the loader question answers itself: the server runs the loader it runs, and a library build for any other loader is dead weight in its folder. Server folders accumulate strays from client setups copied wholesale, and a periodic read of the server mods folder with the filename guide in hand clears them out. Fewer files, fewer mysteries at restart time.

What changes between loader builds of the same version

When the same library version ships for three loaders, players ask whether the files are interchangeable copies. They are parallel builds of the same source, compiled and packaged against each loader's way of registering mods, reading metadata and loading configuration. The settings API your mods use behaves the same by design, which is why a mod's documentation can describe one screen for all loaders. The packaging is what differs, and packaging is what the loader inspects at startup. Same version number, same features, different envelope, and the envelope is addressed to one loader only.

That is also why file sizes differ slightly between loader builds of one version. The difference is packaging and loader-specific glue, not missing content. A smaller file is not a lesser build, and choosing by size is never a signal worth using.

Quilt's place in the bench

Quilt appears in the catalog's earlier stretches, sharing builds with the Fabric line's era, and fades from the newest branches. A player on Quilt today is usually maintaining an older profile, and the older-release route serves them: fix the game version, choose Quilt where it appears, and take the newest build offered. Where Quilt does not appear for a game version, that version's Quilt bench is empty and no file from another loader fills it. The honest options are the game versions where Quilt builds exist, or a loader change for that profile, made openly as a profile decision rather than disguised as a file hunt.

Because Quilt grew from the Fabric ecosystem, some players assume Fabric builds serve Quilt profiles. The catalog treats them as separate loaders with separate files, and so should you: the finder only offers a build under the loader its record names.

Choosing a loader for a brand-new profile

If you are starting fresh and a mod you want lists YACL, the loader choice can be made on evidence from this catalog. Count the library's builds for the game version you intend to play, per loader. A deep bench means dependency problems will have solutions and older pins will be findable. Then check your must-have mods for the same loader. The loader with both the mods and the bench is your loader. This is a small research task, ten minutes at most, and it is the last time the question needs asking for that profile, because once the profile exists, its loader is a fact, not a preference.

What stays the same across loaders

The settings screens a mod builds with YACL look and behave alike on every loader, because that consistency is the point of the library. Your saved choices live in the dependent mod's config file inside the instance's config folder, in the same style on each loader. Switching loaders means replacing the whole mod set for that profile, not converting files, and your per-mod settings usually survive only if the new profile keeps the same config files. Treat a loader change as a new install that happens to share a pack name.